Work with business process flows using code - Power Automate (2022)

  • Article
  • 15 minutes to read

A business process flow lets you create more efficient and streamlined sales, service, and other business processes. It creates a visualization of your business process by placing special controls at the top of the table forms. Users are guided through various stages of sales, marketing, or service processes towards completion. Each process supports multiple stages and steps. You can add or remove steps, change the order of stages, or add new tables to the business process flow.

Different business process flow instances can run concurrently against the same table row. Users can switch between concurrent business process instances, and resume their work at a current stage in the process.

This topic provides information about how you can programmatically work with business process flows.

Note

You don't have to write code to work with business process flows. For information about using the UI to create and manage business process flows, see Business Process Flows overview

Prerequisites for business process flow

Custom tables and tables that have updated UI forms can participate in the business process flow. The updated UI tables have the IsAIRUpdated property set to true.

To enable a table for the business process flow, set the IsBusinessProcessEnabled property to true.

Important

Enabling a table for business process flow is a one way process. You can’t reverse it.

Define business process flow

Use the visual business process flow designer to define a business process flow. More information: Create a business process flow

By default, a business process flow row is created in the Draft state.

A business process flow definition is stored in the workflow table, and the stage information for the business process flow is stored in the processstage table.

Activate business process flow

Before you can use the process flow, you have to activate it. To activate it, you must have the prvActivateBusinessProcessFlow privilege for the Workflow table. Use the UpdateRequest message to set the state of the Workflow table row to Activated. More information: Perform specialized operations using Update

Note

You can also use the business process flow designer to activate a business process flow.

(Video) Triggering and Responding to Power Automate Flow steps in Business Process Flows

Business process flow table

Once you activate a business process flow definition by changing the state of the corresponding Workflow table row or by using the business process flow designer, a custom table with the following name is automatically created to store the activated business process flow instances: "<activesolutionprefix>_<uniquename>", where the uniquename is derived from the name you specify.

For example, if you specified "My Custom BPF" as the name of the business process flow definition and are using the default publisher (new) for your active solution, the name of the custom table created for storing process instances will be "new_mycustombpf".

If the uniquename value isn't available for a business process flow definition, for example if the business process flow was imported as part of solution from an earlier version, the default name of the custom table will be "\<activesolutionprefix>_bpf_<GUID_BPF_Definition>:

Important

The sample business process flow rows use system tables to store the corresponding business process flow instance rows.

However, any new business process flow definitions you create will use custom tables to store its instance rows as explained earlier.

You can retrieve the name of your business process flow table using any of the following ways:

  • Using the UI: Use the customization UI to browse to your business process flow table:

    Work with business process flows using code - Power Automate (1)

  • Using the Web API: Use the following request:

    Request

    GET [Organization URI]/api/data/v9.0/workflows?$filter=name eq 'My Custom BPF'&$select=uniquename HTTP/1.1

    Response

    { "@odata.context":"[Organization URI]/api/data/v9.0/$metadata#workflows(uniquename)","value":[ { "@odata.etag":"W/\"1084677\"", "uniquename":"new_mycustombpf", "workflowid":"2669927e-8ad6-4f95-8a9a-f1008af6956f" } ]}
  • Using the Organization service: Use the following code sample:

    QueryExpression query = new QueryExpression{ EntityName = "workflow", ColumnSet = new ColumnSet("uniquename"), Criteria = new FilterExpression { Conditions = { new ConditionExpression { ColumnName = "name", Operator = ConditionOperator.Equal, Values = { "My Custom BPF" } } } }};Workflow Bpf = (Workflow)_serviceProxy.RetrieveMultiple(query).Entities[0]; 

Note

The IsBPFEntity property is true for business process flow tables. You can retrieve all the business process flow tables in your instance by running the following Web API request:

GET [Organization URI]/api/data/v9.0/EntityDefinitions?$select=SchemaName,LogicalName,DisplayName&$filter=IsBPFEntity eq true HTTP/1.1

Manage security for business process flows

The custom table that is automatically created on activating a business process flow to store business process flow instances adheres to the standard security model as for any other custom table in Microsoft Dataverse. This implies that privileges granted on these tables define the runtime permissions for users for business process flows.

The custom business process flow table has organization scope. The regular create, retrieve, update and delete privileges on this table define the permission users would have based on their assigned roles. By default, when the business process flow custom table is created, only System Administrator and System Customizer security roles are granted access to it, and you must explicitly grant permissions to the new business process flow table (for example, My Custom BPF) for other security roles as required.

(Video) Business Process Flows: Tutorial for Beginners

Work with business process flows using code - Power Automate (2)

Create, retrieve, update, and delete business process flow table rows (process instances)

The custom table that is automatically created on activating a business process flow definition stores all the process instances for the business process flow definition. The custom table supports the standard programmatic creation and management of rows (process instances) using Web API and CRM 2011 endpoint.

Important

Switching to another process instance for a table row is only supported through UI (client) or programmatically using information available in this section. You can no longer use the SetProcess message (SetProcess Action or SetProcessRequest) to programmatically switch processes (set another business process flow as the active process instance) for the target table row.

Lets consider the following example where we have a cross-table business process flow, "My Custom BPF," with 3 stages: S1:Account, S2:Account, and S3:Contact.

Work with business process flows using code - Power Automate (3)

Retrieve all the rows (instances) for a business process flow table

If the name of your business process flow table is "new_mycustombpf", use the following query to retrieve all the rows (process instances) for your business process flow table:

GET [Organization URI]/api/data/v9.0/new_mycustombpfs HTTP/1.1 

At this point, you might not get any instances in your response as there are none. Run this request after creating an instance of your business process flow definition later in this topic.

Create a business process flow table row (process instance)

Create a business process flow table row (process instance) programmatically if you want to switch to another business process flow for a table row without using the UI.

To create a business process flow table row, you need to specify the following values:

  • Associate the business process flow table row to a primary table row by setting the single-valued navigation property using the @odata.bind annotation. To find out the navigation-property name that points to the primary table row for your business process flow definition, use the CSDL $metadata document.

  • Associate the business process flow table row to a valid stage specified in the business process flow definition by setting the single-valued navigation property using the @odata.bind annotation. To find out the navigation-property name (typically activestageid) that points to the stage row for your business process flow definition, use the CSDL $metadata document.

    Also, you can retrieve information about all the stages for a business process flow definition by using the following Web API request assuming that the ID of your business process flow definition is 2669927e-8ad6-4f95-8a9a-f1008af6956f:

    Request

    GET [Organization URI]/api/data/v9.0/processstages?$select=stagename&$filter=processid/workflowid eq 2669927e-8ad6-4f95-8a9a-f1008af6956f HTTP/1.1

    Response

    (Video) Setting Business Process Flows Using Power Automate

    { "@odata.context": "[Organization URI]/api/data/v9.0/$metadata#processstages(stagename)", "value": [ { "@odata.etag": "W/\"858240\"", "stagename": "S1", "processstageid": "9a9185f5-b75b-4bbb-9c2b-a6626683b99b" }, { "@odata.etag": "W/\"858239\"", "stagename": "S3", "processstageid": "a107e2fd-7543-4c1a-b6b4-b8060ecb1a1a" }, { "@odata.etag": "W/\"858238\"", "stagename": "S2", "processstageid": "19a11fc0-3398-4214-8522-cb2a97f66e4b" } ]}

Next, use the following request to create an instance of your business process flow definition for an account row (ID=a176be9e-9a68-e711-80e7-00155d41e206) and the active stage set as the first stage of the process instance, S1 (ID=9a9185f5-b75b-4bbb-9c2b-a6626683b99b):

Request

POST [Organization URI]/api/data/v9.0/new_mycustombpfs HTTP/1.1 Content-Type: application/json; charset=utf-8 OData-MaxVersion: 4.0 OData-Version: 4.0 Accept: application/json { "bpf_accountid@odata.bind": "/accounts(a176be9e-9a68-e711-80e7-00155d41e206)", "activestageid@odata.bind": "/processstages(9a9185f5-b75b-4bbb-9c2b-a6626683b99b)" }

Response

HTTP/1.1 204 No ContentOData-Version: 4.0OData-EntityId: [Organization URI]/api/data/v9.0/new_mycustombpfs(cc3f721b-026e-e811-80ff-00155d513100)

Note that if you want to create an instance of your business process flow definition with the active stage set as a stage other than the first stage, you must also provide traversedpath in your request. Traversed path is the comma-delimited string of process stage ids that represent visited stages of the business process flow instance. The following request creates an instance for an account row (ID=679b2464-71b5-e711-80f5-00155d513100) and active stage set as the second stage, S2 (ID=19a11fc0-3398-4214-8522-cb2a97f66e4b).

POST [Organization URI]/api/data/v9.0/new_mycustombpfs HTTP/1.1 Content-Type: application/json; charset=utf-8 OData-MaxVersion: 4.0 OData-Version: 4.0 Accept: application/json { "bpf_accountid@odata.bind": "/accounts(679b2464-71b5-e711-80f5-00155d513100)", "activestageid@odata.bind": "/processstages(19a11fc0-3398-4214-8522-cb2a97f66e4b)", "traversedpath":"9a9185f5-b75b-4bbb-9c2b-a6626683b99b,19a11fc0-3398-4214-8522-cb2a97f66e4b" }

Update a business process flow table row (process instance)

You can update a process instance to move to next or previous stage, abandon a process instance, reactivate a process instance, or finish a process instance.

Stage navigation

To navigate to a different stage, you need to update a process instance row to change its active stage ID and accordingly update the traversed path. Note that you must only move to the next or previous stage while updating a business process flow instance.

To perform stage navigation, you will need the ID of the business process flow instance that you want to update. To retrieve all the instances of your business process flow, see Retrieve all the rows (instances) for a business process flow table earlier.

Assuming the ID of the process instance you want to update is dc2ab599-306d-e811-80ff-00155d513100, use the following request to update the active stage from S1 to S2:

PATCH [Organization URI]/api/data/v9.0/new_mycustombpfs(dc2ab599-306d-e811-80ff-00155d513100) HTTP/1.1Content-Type: application/jsonOData-MaxVersion: 4.0OData-Version: 4.0{ "activestageid@odata.bind": "/processstages(19a11fc0-3398-4214-8522-cb2a97f66e4b)", "traversedpath": "9a9185f5-b75b-4bbb-9c2b-a6626683b99b,19a11fc0-3398-4214-8522-cb2a97f66e4b"}

Change the state of a process instance: Abort, Reactivate, or Finish

A process instance can have one of the following states: Active, Finished, or Aborted. The state is determined by the following columns on the process instance row:

  • statecode: Displays the status of the process instance.

    ValueLabel
    0Active
    1Inactive
  • statuscode: Displays information about status of the process instance.

    ValueLabel
    1Active
    2Finished
    3Aborted

So, to Abort a process instance, use the following request set the statecode and statuscode values appropriately:

PATCH [Organization URI]/api/data/v9.0/new_mycustombpfs(dc2ab599-306d-e811-80ff-00155d513100) HTTP/1.1 Content-Type: application/json OData-MaxVersion: 4.0 OData-Version: 4.0 { "statecode" : "1", "statuscode": "3" }

Similarly, to reactivate a process instance, replace the statecode and statuscode values in the above code with 0 and 1 respectively.

Finally, to set a process instance status as Finished, which is only possible at the last stage of a process instance, replace the statecode and statuscode values in the above code with 0 and 2 respectively.

Cross-table navigation

For cross-table navigation in this example, you must set the active stage of the process instance to the last stage, S3 (ID=a107e2fd-7543-4c1a-b6b4-b8060ecb1a1a), update the traversed path accordingly, and set a contact row as the primary table row as per the business process flow definition.

PATCH [Organization URI]/api/data/v9.0/new_mycustombpfs(dc2ab599-306d-e811-80ff-00155d513100) HTTP/1.1 Content-Type: application/json OData-MaxVersion: 4.0 OData-Version: 4.0 { "activestageid@odata.bind": "/processstages(a107e2fd-7543-4c1a-b6b4-b8060ecb1a1a)", "traversedpath":"9a9185f5-b75b-4bbb-9c2b-a6626683b99b,19a11fc0-3398-4214-8522-cb2a97f66e4b,a107e2fd-7543-4c1a-b6b4-b8060ecb1a1a", "bpf_contactid@odata.bind": "/contacts(0e3f10b0-da33-e811-80fc-00155d513100)"}

Delete a business process flow table row (process instance)

Use the following Web API request:

(Video) Business Process Flow (BPF) in Model-Driven Power Apps

Request

DELETE [Organization URI]/api/data/v9.0/new_mycustombpfs(dc2ab599-306d-e811-80ff-00155d513100) HTTP/1.1

Response

If the row exists, you’ll get a normal response with status 204 to indicate the delete was successful. If the table isn’t found, you’ll get a response with status 404.

Use RetrieveProcessInstances and RetrieveActivePath messages

Use the RetrieveProcessInstances message (RetrieveActivePath Function or RetrieveProcessInstancesRequest) to retrieve all the business process flow instances for a table row across all business process definitions. The business process flow instances returned for a table are ordered based on the modifiedon column for the instance. For example, the most recently modified business process flow instance will be the first row in the returned collection. The most recently modified business process flow instance is the one that is active on the UI for a table row.

Each business process flow instance row returned for a table row as a result of using the RetrieveProcessInstances message stores the ID of the active stage in the processstageid column that can be used to find the active stage, and then move to the previous or next stage. To do so, you first need to find the active path of a business process flow instance and the stages available in the process flow instance using the RetrieveActivePath message (RetrieveActivePath Function or RetrieveActivePathRequest).

Once you have the active stage and the active path information for a business process flow instance, you can use the information to move to a previous or next stage in the active path. Forward navigation of stages must be done in sequence, that is, you should only move forward to the next stage in the active path.

For the complete sample that code demonstrates the usage of these two methods and stage navigation using the Organization service, see Sample: Work with business process flows.

Apply business process flow while creating a table row

This section provides information about the default behavior for applying business process flows automatically to new table rows created in Dataverse, and how you can override it to apply a business process flow of your choice for new table rows.

By default, for a table that has multiple business process flows defined for it, the system applies a business process flow to the new table row using the following multi-step logic:

  1. Identify all business process flows applicable to the new table row based on the Workflow.PrimaryEntity column of the business process flow definition rows.
  2. Identify the business process flow definitions that the current user has access to. For information about how access to a business process flow is determined and managed, see Manage security for business process flows earlier in this topic.
  3. All business process flow definitions in the system are subject to a global order per table. The order of the business process flow is stored in the Workflow.ProcessOrder column. The business process flow definitions for a table are sorted based on this order, and the one with the least order value is picked.
  4. Finally, if the table row is created from a business app (app module), one more level of filtering is applied to pick the business process flow to be applied automatically to the new table row.When working in an app, users can access only relevant tables, business process flows, views and forms that they have access to by virtue of the security roles assigned to the business app.
    • If the business app does not contain any business process flow then business process flow is applied as explained until step 3.
    • If the business app has one or more business process flows then only the business process flows present in the app would be applicable. In this case, when the user is working within a business app context, the list of business process flows from step 3 are filtered further to the ones that are part of the business app that are present inside the app module, and are sorted based on the process order.
    • If no business process flow is available in a business app for the table or one that the user has access to then no business process flow is applied for the new table row.

You can override the default logic of business process flows getting applied automatically to new table rows. To do so, set the ProcessId column of the table to one of the following values while creating a new table row:

  • Set to Guid.Empty to skip setting a business process flow for new table rows. You might want to do that if you are bulk creating table rows, but don't want business process flow to to be applied to them.
  • Set it to a specific business process flow table (as a table reference). In this case, the system will apply the specified business process flow instead of the default logic.

If you do not set a value for the ProcessId column while creating a new table row, the system will apply the default logic as explained earlier.

Note

Overriding the default logic of business process flows getting applied automatically to new table rows is only supported programmatically. You cannot do this using the UI.

The legacy process-related columns (such as ProcessId, StageId, and TraversedPath) on tables enabled for business process flows are already deprecated. Manipulating these legacy process related columns for target table rows does not guarantee consistency of the business process flow state, and is not a supported scenario. The recommended way is to use the columns of the business process flow table as explained earlier in the section Create, retrieve, update, and delete business process flow table rows (process instances)

The only exception to this is programmatically modifying the ProcessId column while creating a table row to override the default application of the business process flow to the new row as explained in the previous section: Apply business process flow while creating a table row.

Client-side programmability support for business process flows

There is a client-side object you can use to interact with business process flows in your form scripts. Business process flows trigger client-side events every time a process is either applied to a row, the stage is changed, or its status is changed to Active, Finished, or Aborted. More information: formContext.data.process (Client API reference)

Maximum number of processes, stages, and steps

Per table, the default value for the maximum number of activated business process flows is 10. You can specify a different value by using the Organization.MaximumActiveBusinessProcessFlowsAllowedPerEntity column. However, if the value is greater than 10, you may see a decrease in your system’s performance when you switch processes or open a row that has an assigned business process flow. This may be especially noticeable if processes span multiple tables.

The following settings aren’t customizable:

(Video) JavaScript Lesson 3: Interacting with Business Process Flows

FAQs

What are the business processes you can automate with Power Automate? ›

7 processes you should automate using Microsoft Power Automate
  • Example 2: Manage Holiday Requests and Approvals. ...
  • Example 3: Request Approval for new documents and notify employees via Teams. ...
  • Example 4: Get a push notification when you receive an email from your boss. ...
  • Example 5: Stay on top of new Dynamics 365 Opportunities.

What are the three types of flows you can create with Power Automate? ›

You can create cloud flows, desktop flows, or business process flows. Check out this video about the different types of flows.

What license is required to create or use a business process flow? ›

To create business process flows, you need a Power Apps or Power Automate per user license, or a Dynamics 365 license plan that includes business process flow use rights.

How do you write a business process flow? ›

The 6 steps to making a business process flow diagram
  1. Determine the main components of the process. ...
  2. Order the activities. ...
  3. Choose the correct symbols for each activity. ...
  4. Make the connection between the activities. ...
  5. Indicate the beginning and end of the process. ...
  6. Review your business process diagram.
11 Apr 2016

Is Power Automate worth learning? ›

Overall: Power automate saves great deal of time by automating. Its UI is easy to understand and fun to use. Overall its a great and fun experience using this application. Pros: It comes from Microsoft hence the customer support is awesome.

What is the difference between workflow and process flow? ›

Workflow vs Process

A workflow consists of repeatable activities necessary to complete a task. A process refers to all of the elements necessary to accomplish a larger organizational goal.

Is business process flows are considered automatic flows? ›

Rather than being a Flow, they're a collection of connected data, flows, actions, apps, and other artifacts to make up an end to end process. BPFs actually got their start within Microsoft Dynamics as a way of automating work flows.

Can I have BPF in canvas app? ›

You can take a look at the GetEntityFieldsValue Flow to see this in action. Here is a list of CDS APIs exposed in the customer connector used in our Canvas-based BPF implementation. The BPF component is generic in its implementation and allows you to use any business process flow.

How many flows can I create in Power Automate? ›

How many flows can I have? You can create an unlimited number of flows, depending on the type of license you hold.

Is Power Automate difficult? ›

Power Automate is extremely easy to use. Even non-technical users can create workflows using simple features. Power Automate easily integrates with other applications. It provides plenty of built-in connectors with the help of which you can integrate workflows into multiple apps such as SharePoint, Outlook, Slack, etc.

What are the limitations of Power Automate? ›

Duration limits
NameLimit
Run duration30 days
Run retention in storage30 days
Minimum recurrence interval60 seconds
Maximum recurrence interval500 days
1 more row
7 Sept 2022

What is business process give an example? ›

They are the processes that directly create revenue. Examples include: product manufacturing, order to cash process, and delivering products to customers.

Why do we use business process flow? ›

Business process flows provide a guide for people to get work done. They provide a streamlined user experience that leads people through the processes their organization has defined for interactions that need to be advanced to a conclusion of some kind.

Is Microsoft Flow the same as Power Automate? ›

On the branding side, Microsoft Flow is now called Power Automate. Power Automate is a cloud-based software tool that allows employees to create and automate workflows across multiple applications and services without the need for developer help.

How long it will take to learn Power Automate? ›

Power Automate Course Overview

MindMajix's Power Automate training program offers 16 hours of online training and 4 hours of hands-on in building and managing flows in Power Automate.

Which companies are using Power Automate? ›

Companies Currently Using Microsoft Power Automate
Company NameWebsiteTop Level Industry
Federal Reserve Bankfederalreserve.govFinance
Parker Hannifinparker.comManufacturing
Huntington Ingalls Industrieshuntingtoningalls.comManufacturing
3M3m.comBusiness Services
2 more rows

Can Power Automate perform calculations? ›

Power Automate enables you to create complex expressions containing hardcoded values, variable names, arithmetic and logical operations, comparisons and parentheses.

When should I use Power Automate? ›

Power Automate helps businesses tackle everyday activities more efficiently, and it provides employees a tremendous user experience. For example, it can collect data, approve off-cycle payrolls, organize meetings, automate emails, schedule content through social media, etc.

What is Microsoft Power automate free for? ›

What is the Power Automate free license? The Power Automate Free license is used only for tracking purposes. Enabling or disabling it has no effect on a user's ability to create flows. If you disable the Power Automate Free license, it becomes enabled again when a user logs in.

What is Microsoft Power automate template? ›

A Power Automate template is a pre-created Flow that will allow you to automate a process in minutes, and only having to point it at the pieces that you want automated. Here are a few examples of templates that you can setup to simplify your workday.

What is the biggest benefit of automating processes? ›

The benefits of automated operations are higher productivity, reliability, availability, increased performance, and reduced operating costs. Moving to lights-out operations yields a good return on investment. The benefits of automated systems can be a powerful motive for increasing service to your end users.

What are five advantages of automation? ›

Benefits of Automation
  • Lower operating costs. ...
  • Improved worker safety. ...
  • Reduced factory lead times. ...
  • Faster ROI. ...
  • Ability to be more competitive. ...
  • Increased production output. ...
  • Consistent and improved part production and quality. ...
  • Smaller environmental footprint.

How do you show business process flows in Dynamics 365? ›

What is Business Process Flow Designer in Dynamics 365?
  1. Go to Settings >> Process >> New.
  2. Click “New” to create a new business process flow D365.
  3. Enter “Process Name”
  4. Select “Category” from the drop-down menu.
  5. Select “Entity” from the drop-down menu.
  6. Click “OK”

What is business process flow in model-driven app? ›

Business process flows are used to guide a user through the steps of your business process when working with Model-driven apps and Microsoft Dataverse. The example below will guide you through the process and decisions you need to make when building a business process flow. 1.

What type of business process flows does Microsoft Dataverse include? ›

What type of business process flows does Microsoft Dataverse include? A number of out-of-the-box predefined business process flows. Where can business process flows be embedded? They can be embedded in model-driven Power Apps.

How do I enable BPF in Dynamics 365? ›

What is a BPF Designer in Dynamics 365?
  1. Go to Settings >> Process >> New.
  2. Click “New” to create a new business process flow D365.
  3. Enter “Process Name”
  4. Select “Category” from the drop-down menu.
  5. Select “Entity” from the drop-down menu.
  6. Click “OK”
31 Dec 2021

How do I change the BPF stage automatically using Workflow in Dynamics 365? ›

Check the “Run this Workflow in the background” option.
  1. Check the “Process Changes” option.
  2. Click “Select” button. ...
  3. Design the steps of your Workflow in any way you want.
  4. Add “Update Record” to update your BPF stage. ...
  5. Click “Set Properties”, select your “Active Stage”. ...
  6. Save and Activate your workflow.
5 Jan 2022

What is business process flow in Dynamics 365 CRM? ›

Dynamics 365 business process flow is a tool in Dynamics 365 that provides a visual element to your business process flow (BPF) by equipping you with visual presentations of Processes. Thus, all the BPFs in Dynamics 365 are represented on the heading across the top of an Entity form.

Why do we use business process flow? ›

Business process flows provide a guide for people to get work done. They provide a streamlined user experience that leads people through the processes their organization has defined for interactions that need to be advanced to a conclusion of some kind.

How do you make BPF? ›

How to create a Business Process Flow (BPF).
  1. Click Process in Setting Area. ...
  2. Now you will see a new pop up which is a generic popup for creating multiple process.
  3. Add Name as per your understanding.
  4. In Option set of Type Select Business process Flow. ...
  5. Select Entity for which you want to create a business process flow.
26 Jan 2019

How do you add next stage in business process flow? ›

Did you manage to get the 'Next Stage' button visible? You need to create the initial record of the entity on which the business process flow is running. Once the record is created, the 'Next Stage' button should appear. Let me know if this helps.

What is business process give an example? ›

They are the processes that directly create revenue. Examples include: product manufacturing, order to cash process, and delivering products to customers.

What is the difference between workflow and process flow? ›

Workflow vs Process

A workflow consists of repeatable activities necessary to complete a task. A process refers to all of the elements necessary to accomplish a larger organizational goal.

How do I add BPF to model driven app? ›

Introduction
  1. Login to the required environment and go to flows and select Business process flows – Vaccination and observe whether BPF is active or not, if not then activate it as shown in the below figure.
  2. After Step 1, select Model Driven App Vaccination and open designer as shown in the below figure.
24 Nov 2021

How many recordings do you need to analyze a process Power Automate? ›

After you have enough recordings uploaded to analyze (the minimum requirement is two recordings), you can select Processes to begin the analysis process. Here you can see everything that has been submitted for analysis, who submitted it, and what the Status is.

For which scenario you can use Power Automate? ›

Power Automate can help. Power Automate is all about having computers manage repetitive tasks. Power Automate allows anyone with knowledge of the business process to create a repeatable flow that when triggered, leaps into action and performs the process.

Is business process flows are considered automatic flows? ›

Rather than being a Flow, they're a collection of connected data, flows, actions, apps, and other artifacts to make up an end to end process. BPFs actually got their start within Microsoft Dynamics as a way of automating work flows.

Videos

1. Power Automate | Update Business Process (BPF) Flow Traversed Path | Dynamics CRM 365
(dotNetLittleBoy)
2. Microsoft Power Automate - Business Process Flows Tutorial | Part 2
(Jon Levesque)
3. Call Custom Action from Business Process Flow (BPF) | Dynamics 365
(Softchief Learn)
4. PL-400 Exam Prep: Business Process Automation Using Power Automate Cloud Flows
(CRM Chap)
5. Webinar Business Process Automation using Power Automate
(DECODE Cloud)
6. Model-Driven Apps Lesson 3: Interacting Programmatically with Business Process Flows
(PowerApps Solutions in Minutes)

Top Articles

Latest Posts

Article information

Author: Tyson Zemlak

Last Updated: 10/21/2022

Views: 6031

Rating: 4.2 / 5 (43 voted)

Reviews: 82% of readers found this page helpful

Author information

Name: Tyson Zemlak

Birthday: 1992-03-17

Address: Apt. 662 96191 Quigley Dam, Kubview, MA 42013

Phone: +441678032891

Job: Community-Services Orchestrator

Hobby: Coffee roasting, Calligraphy, Metalworking, Fashion, Vehicle restoration, Shopping, Photography

Introduction: My name is Tyson Zemlak, I am a excited, light, sparkling, super, open, fair, magnificent person who loves writing and wants to share my knowledge and understanding with you.